um5k1n transistors rev.a 1/3 2.5v drive nch+nch mos fet um5k1n z structure silicon n-channel mos fet z features 1) two 2sk3018 transistors in a single umt package. 2) mounting cost and area can be cut in half. 3) low on-resistance. 4) low voltage drive (2.5v) makes this device ideal for portable equipment. 5) drive circuits can be simple. z applications interfacing, switching (30v, 100ma) z external dimensions (unit : mm) each lead has same dimensions umt5 0.9 0.15 0.1min. 0.7 2.1 1.3 0.65 2.0 0.2 1.25 0.65 ( 4 ) ( 1 ) ( 5 ) ( 2 ) ( 3 ) 1pin mark abbreviated symbol : k1 z packaging specifications z equivalent circui (1) ? gate protection diode ? gate protection diode tr1 tr2 ? a protection diode has been built in between the gate and the source to protect against static electricity when the product is in use. use the protection circuit when rated voltagesare exceeded. (1) tr1 gate (2) source (3) tr2 gate (4) tr2 drain (6) tr1 drain (2) (3) (4) (6) tr 3000 um5k1n type package code basic ordering unit (pieces) taping z absolute maximum ratings (ta=25 c) parameter drain-source voltage gate-source voltage drain current total power dissipation channel temperature storage temperature v v ma mw / total ?c continuous pulsed ma ?c v dss v gss p d ? 2 tch i d i dp ? 1 tstg symbol 30 ?0 ?00 ?00 150 mw / element 120 150 ?55 to +150 limits unit ? 1 pw10s, duty cycle50% ? 2 with each pin mounted on the recommended lands. z thermal resistance parameter c / w / total rth(ch-a) symbol limits unit channel to ambient ? with each pin mounted on the recommended lands. 833 c / w / element 1042 ?
um5k1n transistors rev.a 2/3 z electrical characteristics (ta=25 c) parameter symbol i gss v (br)dss i dss v gs(th) r ds(on) r ds(on) c iss y fs c oss c rss min. ? 30 ? 0.8 ? ? 20 ? ? ? ? ? ? 5 13 ? 9 4 1 ? 1 1.5 8 ? 713 ? ? ? ? av gs = 20v, v ds = 0v i d = 10a, v gs = 0v v ds = 30v, v gs = 0v v ds = 3v, i d = 100a i d = 10ma, v gs = 4v i d = 1ma, v gs = 2.5v v ds = 5v i d = 10ma, v ds = 3v v gs = 0v f = 1mhz v a v ? ? pf ms pf pf t d(on) ? 15 ? i d = 10ma, v dd 5v ns t r ? 35 ? v gs = 5v ns t d(off) ? 80 ? r l = 500? ns t f ? 80 ? r g = 10? ns typ. max. unit test conditions gate-source leakage drain-source breakdown voltage zero gate voltage drain curren t gate threshold voltage forward transfer admittance input capacitance output capacitance reverse transfer capacitance turn-on delay time rise time turn-off delay time fall time static drain-source on-stage resistance z electrical characteristic curves 012345 0 0.05 0.1 0.15 drain current : i d ( a) drain-source voltage : v ds ( v) 3v 3.5v 2.5v v gs =1.5v 4v 2v ta=25?c pulsed fig.1 typical output characteristics 04 0.1m 100m drain current : i d ( a) gate-source voltage : v gs ( v) 1 10m 3 2 1m 0.2m 0.5m 2m 5m 50m 20m 200m ta=125?c 75?c 25?c ?25?c v ds =3v pulsed fig.2 typical transfer characteristics ? 50 0 0 1 1.5 2 gate threshold voltage : v gs (th) ( v) channel temperature : tch (?c) 0.5 ? 25 25 50 75 100 125 150 v ds =3v i d =0.1ma pulsed fig.3 gate threshold voltage vs. channel temperature 0.001 1 2 50 static drain-source on-state resistance : r ds (on) (?) drain current : i d ( a) 0.5 0.002 0.005 0.01 0.02 0.05 0.1 0.2 0.5 5 10 20 ta=125?c 75?c 25?c ?25?c v gs =4v pulsed fig.4 static drain-source on-state resistance vs. drain current ( i ) 0.001 1 2 50 static drain-source on-state resistance : r ds (on) (?) drain current : i d ( a) 0.5 0.002 0.005 0.01 0.02 0.05 0.1 0.2 0.5 5 10 20 ta=125?c 75?c 25?c ?25?c v gs =2.5v pulsed fig.5 static drain-source on-state resistance vs. drain current ( ii ) 0 5 10 15 20 0 5 10 15 gate-source voltage : v gs ( v) i d =0.1a static drain-source on-state resistance : r ds (on) (?) ta=25?c pulsed i d =0.05a fig.6 static drain-source on-state resistance vs. gate-source voltage
um5k1n transistors rev.a 3/3 ? 50 0 25 150 0 3 6 9 channel temperature : tch (?c) static drain-source on-state resistance : r ds (on) (?) ?25 50 75 100 125 2 1 4 5 7 8 v gs =4v pulsed i d =100ma i d =50ma fig.7 static drain-source on-state resistance vs. channel temperature 0.0001 0.001 0.01 0.02 0.5 forward transfer admittance : yfs (s) drain current : i d ( a) 0.005 0.0002 0.0005 0.001 0.002 0.005 0.01 0.02 0.05 0.05 0.1 0.2 0.1 0.2 0.5 0.002 ta=?25?c 25?c 75?c 125?c v ds =3v pulsed fig.8 forward transfer admittance vs. drain current 200m reverse drain current : i dr ( a) source-drain voltage : v sd ( v) 1.5 1 0.5 0 100m 50m 20m 10m 5m 2m 1m 0.5m 0.2m 0.1m v gs =0v pulsed ta=125?c 75?c 25?c ?25?c fig.9 reverse drain current vs. source-drain voltage ( i ) 200m reverse drain current : i dr ( a) source-drain voltage : v sd (v) 1.5 1 0.5 0 100m 50m 20m 10m 5m 2m 1m 0.5m 0.2m 0.1m ta=25?c pulsed v gs =4v 0v fig.10 reverse drain current vs. source-drain voltage ( ii ) 0.1 1 2 50 capacitance : c (pf) drain-source voltage : v ds ( v) 0.5 0.2 0.5 1 2 5 10 20 50 5 10 20 c iss c oss c rss ta =25?c f=1mh z v gs =0v fig.11 typical capacitance vs. drain-source voltage 0.1 10 20 500 switching time : t (ns) drain current : i d ( ma) 5 0.2 0.5 1 2 5 10 20 50 50 100 200 1000 2 100 ta =25?c v dd =5v v gs =5v r g =10? pulsed t d (off) t r t d (on) t f fig.12 switching characteristics (see figures 13 and 14 for the measurment circuit and resultant waveforms) z switching characteristics measurement circuit fig.13 switching time measurement circuit v gs r g v ds d.u.t. i d r l v dd 90% 50% 10% 90% 10% 50% pulse width 10% v gs v ds 90% t f t off t d (off) t r t on t d (on) fig.14 switching time waveforms
appendix appendix1-rev1.1 the products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. about export control order in japan products described herein are the objects of controlled goods in annex 1 (item 16) of export trade control order in japan. in case of export from japan, please confirm if it applies to "objective" criteria or an "informed" (by miti clause) on the basis of "catch all controls for non-proliferation of weapons of mass destruction.
|
